Unistrut 41x21 geschlitzte feuerverzinkte Kanalmaschine
Basisinformation
Modell: ZT-00-002
Produktbeschreibung
Unistrut 41x21 geschlitzte feuerverzinkte Kanalmaschine
Unistrut 41x21 Schlitz-heiße Bad galvanisierte Kanal-Rolle, die Maschine bildet, konnte benutzt werden, um 41x21, 21x21 Schlitzchannel, Schattenkanal, C-Kanal in der Reihe zu bilden und der gesamte Prozess ist vollautomatisch.
Unistrut 41x21 Slotted und 21x21 aus verzinktem Stahl Befestigung Ω STRUT sorgen für Geschwindigkeit und einfache Installation, spart Zeit und Geld bei der Befestigung und Montage im Bau von elektrischen, industriellen und zivilen. Diese Stützelemente sind mit Stahlzink-Sendzimir-Verzinkung und Feuerverzinkung erhältlich.
Bei der Maschinenkonstruktion verwenden wir das Getriebe als Getriebe, um sicherzustellen, dass die Maschine stabil arbeitet und die Oberfläche des Rohmaterials nicht verletzt. Normalerweise verwenden wir rostfreien oder galvanisierten Stahl.
Hier sind einige Zeichnungsprofile für Ihre Referenz :
Auf dem Markt gibt es einen einfachen C-Schlitz-Kanal und dann speichern Sie einfach den Lochstanzteil.
Überprüfen Sie im folgenden Teil die Parameter der Maschine :
MASCHINENKOMPONENTEN :
1 |
Manualdecoiler |
1 set |
2 |
Leveling Machine |
1 set |
3 |
Roll Forming |
1 set |
4 |
Hydraulic Cutting |
1 set |
5 |
PLC Control System |
1 set |
6 |
Hydraulic Station |
1 set |
7 |
Run-out Table-(Un-powered) |
1 set |
1. Decoiler 3 Ton passive de-coiler with brake device Outside diameter of coil: 550mm Inside diameter of the coil: 450mm |
||
2. Feeding and leveling rollers: Rollers: 4 steps, leveling Rollers: 9pcs Diameter: 80mm Leveling thickness: 3.5mm
Feeding
speed: 20m/min
Punching device
|
||
3. Main forming machine : 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm
4)
Roller information: B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer 7) With cooling device
|
||
4. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust. |
||
5. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D.Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
|
||
7. Non-stop hydraulic cutting device
1).
Servo motor power: 5.5kw 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor. |
||
|
Produktgruppe : C/U/Kanal & T Bar Walzprofilieren Maschine > Trockenbau Profil Rollen Umformmaschine